- Equipment
- Glucose Assay
Equipment
Glucose Assay
Specialized Eequipment
In-line System
(Plasma + Dispensing + Drying + Inspection + Laminating)
| Model No. | DAS-9001A/B |
|---|---|
| Capacity | 180 sheets/hour |
| Method | 25 Channels (Precision Syringe Pump, Tubing Tip) |
| Dispensing Volume | Microliter |
| Size | 18,500(L) x 3,000(W) x 2,500(H) mm (Including Laminator Section) |
| Features | Enzyme Cooling System Dispensing Defect - Vision and Marking System (Option) Jig/Mask Auto Circulation |
| Sheet Size | 320 x 320mm (Customer Specification) |
| Process | L1 Sheet Feeding > Plasma Treatment > Remove Protective Film > Placing on Jig > Dispensing > Vision Inspection > Mask placing > 1st Drying > 2nd Drying > Mask/Jig Circulation > Sheet Discharging > Manual Inspection |
Drying
| Model No. | DAS-9001C/D |
|---|---|
| Temp. Range | Max. 80℃ |
| Temp. Accuracy | 50 ± 2℃ |
| Method | Vertical Layer (Elevator Type) |
| Dimension | 2,200(L) x 1,500(W) x 2,500(H) mm |
| Elevator Capacity | Max. 80 sheets (20 layer x 4 lane) |
| Features | Humidity Auto Control System Heater - Schedule Running Possible Over Heating Protector and Alarm View Window Installed (for Product Condition Check) Conveying Speed - Adjustable |
Laminating
| Model No. | LMS-1000 |
|---|---|
| Size | 700(L) x 800(W) x 800(H) mm |
| Required Utility | 1Ø 220VAC, Compressed Air |
| Capacity | 120 sheets/hour |
| Features | Required Manpower : 1 person (Sheet Loading / Unloading) |
| Work Process | Remove Release Liner from L2 > Place L2 Sheet on L2 Sheet Stage > Place L1 Sheet on L1 Stage > Lamination |
Laminating
| Model No. | LSS-1001 |
|---|---|
| Size | 1,600(L) x 1,000(W) x 1,800(H) mm |
| Required Utility | 1P, 220VAC, Compressed Air |
| Capacity | 120 sheets/hour |
| Features | Required Manpower : 1 person (Sheet Loading / Unloading) |
| Work Process | Place L1+L2 Sheet on Conveyor > Lamination by Heating Roller > Finished Sheet Auto Loading in Magazine |
Laminating
| Model No. | LAS-1001 |
|---|---|
| Temp. Range | Max. 100℃ |
| Temp. Accuracy | 50 ± 2℃ |
| Method | Pick & Place, Heating Roller |
| Size | 3,500(L) x 3,000(W) x 2,000(H) mm |
| Features | Individual Temperature. Control of Heating Roller |
| Work Process | L2/L3 Film Feeding > Remove protective film > L1 Feeding > Lamination > Heating Roll Lamination > Discharging |
Plasma Treatment
| Model No. | DSS-9000A |
|---|---|
| Plasma Head | 2ea |
| Size | 1,000(L) x 1,000(W) x 1,800(H) mm |
| Required Utility | 1Ø 220VAC |
| Capacity | 120 sheets/hour |
| Features | Required Manpower : 1 person (Sheet Loading / Unloading) |
| Work Process | L1+Mask Film Feeding > Conveying to Plasma Head Section > Plasma Treatment > Sheet Unloading |
This system automatically feeds the finished sheets loaded into the magazine, cutting them into rows.
Vision system and robot classify them as good and bad (bad cell included row) and put them into separate magazine.
Slitting
Sheet Feeding > Vision Inspection> Cutting > Row Collection
| Model No. | SAR-1401 |
|---|---|
| Capacity | About 15 sec/sheet |
| Sheet | Customer Specification |
| Cutting Accuracy | ±0.1 mm |
This system automatically feeds the finished rows from magazine and cuts them into cells.
The cells are collected in a bottle through a chute on the discharge side and then transferred to conveyor, proceeding to subsenquent capping process.
Slitting
Row Feeding > Inspection (Cutting Position, 2-Row Overlapping Feeding) > Bottle Feeding > Cutting > Cap Feeding > Capping -> Discharging (Counting Quantity)
| Model No. | SSC-5010 |
|---|---|
| Capacity | About 2.5 sec/row |
| Material Specification | Customer Specification |
| Bottle Type | Sanner Bottle (Separated Bottle & Cap Type) |
| Cutting Strip Accuracy | ±0.1 mm |
| Chute | Chute : 50-cell Chute x 1 ea (25-cell Chute x 2ea Available) |
